-
List Of Active Publication
Journal Article : MECHANICAL PROPERTIES OF NOVEL HYBRID BAMBOO FIBRE/ALUMINIUM MESH REINFORCED POLYMER COMPOSITE 2024, 22318526, Penulis Bersama - Co-Author, http://www.pertanika.upm.edu.my/pjst/browse/special-issue?article=JST(S)-0627-2024 | |
Journal Article : CRUSHING PERFORMANCES OF KENAF FIBRE REINFORCE COMPOSITE TUBES 2024, 22897895, Penulis Utama - Corresponding Author, https://semarakilmu.com.my/journals/index.php/appl_mech/article/view/5510 | |
Journal Article : INTERACTION OF EXTERNAL SURFACE CRACKS ON THICK CYLINDERS UNDER MODE III MOMENT AND COMBINED WITH MODE I LOADING
2024, 22315381, Penulis Utama - Corresponding Author, https://ijettjournal.org/Volume-72/Issue-5/IJETT-V72I5P106.pdf | |
Journal Article : INTERACTION ASSESSMENT OF STRESS INTENSITY FACTORS OF SURFACE CRACKS ON THICK CYLINDERS UNDER TENSION FORCE AND BENDING MOMENT 2024, 22897895, Penulis Utama - Corresponding Author, https://semarakilmu.com.my/journals/index.php/appl_mech/article/view/5511 | |
Journal Article : A REVIEW OF EXPERIMENTATION NUMERICAL SIMULATION OF LOW-VELOCITY IMPACT PERFORMANCES AND DAMAGES OF FIBER-REINFORCED COMPOSITES 2024, 22897895, Penulis Pertama UTHM - First Author, https://semarakilmu.com.my/journals/index.php/appl_mech/article/view/7587 | |
Journal Article : A BRIEF REVIEW ON THE UTILIZATION OF BIOPOLYMERS IN THE MANUFACTURING OF NATURAL FIBER COMPOSITES 2024, 18234690, Penulis Bersama - Co-Author, https://jestec.taylors.edu.my/Special%20Issue%20on%20ICIT2022_2/ICIT2022_2_05.pdf | |
Journal Article : EFFECT OF WELDING HEAT INPUT ON THE MECHANICAL PROPERTIES OF MILD STEEL AT COARSE GRAIN HEAT AFFECTED ZONE (CGHAZ) 2024, 22897895, Penulis Bersama - Co-Author, https://doi.org/10.37934/aram.116.1.145155 | |
Journal Article : A REVIEW ON CARBON FIBER REINFORCED POLYMER AS WRAPPING STRUCTURES FOR PIPELINE 2023, 2229838x, Penulis Bersama - Co-Author, https://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/9070 | |
Journal Article : INTERACTION OF DOUBLE PARALLEL CRACKS LOCATED ON A HOLLOW CYLINDER. 2023, 16797825, Penulis Pertama UTHM - First Author, https://lajss.org/index.php/LAJSS/article/view/7786 | |
Journal Article : A SYSTEMATIC REVIEW ON CARDIOVASCULAR STENT AND STENTING FAILURE: COHERENT TAXONOMY, PERFORMANCE MEASURES, MOTIVATIONS, OPEN CHALLENGES AND RECOMMENDATIONS 2022, 2229838x, Penulis Pertama UTHM - First Author, https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/6842 | |
Journal Article : EXPERIMENTAL ANALYSIS ON MACHINING PROPERTIES IN TURNING OF NIMONIC C-263 2022, 23490918, Penulis Pertama UTHM - First Author, https://ijettjournal.org/archive/ijett-v70i11p215 | |
Journal Article : A REVIEW ON FEMOROPOPLITEAL ARTERIAL DEFORMATION DURING DAILY LIVES AND NICKEL-TITANIUM STENT PROPERTIES 2022, 03091902, Penulis Pertama UTHM - First Author, https://www.tandfonline.com/doi/abs/10.1080/03091902.2022.2041749 | |
Journal Article : HYBRIDIZATION EFFECT ON CRASHWORTHINESS PARAMETERS OF NATURAL COMPOSITE 2021, 22968016, Penulis Utama - Corresponding Author, https://www.frontiersin.org/articles/10.3389/fmats.2021.619245/full | |
Journal Article : STUDY OF FATIGUE LIFE ON ALUMINIUM COMPOSITES ¿ FLY ASH RECEIVED T6 HEAT TREATMENT AND ARTIFICIAL AGING 2021, 23490918, Penulis Pertama UTHM - First Author, http://www.ijettjournal.org/archive/ijett-v69i2p202 | |
Journal Article : A REVIEW ON THE DEVELOPMENT OF PANEL AND MEMBRANE SOUND ABSORBERS 2021, 229-838x, Penulis Bersama - Co-Author, https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/5258/4070 | |
Journal Article : PREPARATION AND PHYSICOCHEMICAL CHARACTERIZATION OF A DICLOFENAC SODIUM-DUAL LAYER POLYVINYL ALCOHOL PATCH 2021, 20734360, Penulis Pertama UTHM - First Author, https://www.mdpi.com/2073-4360/13/15/2459 | |
Journal Article : THE EFFECT OF A MIXTURE OF EPOXY RESIN MATRIX COMPOSITE MATERIALS AND HARDENER BY VARYING THE STIRRING SPEED ON THE MECHANICAL PROPERTIES 2021, 23490918, Penulis Utama - Corresponding Author, https://ijettjournal.org/archive/ijett-v69i11p210 | |
Journal Article : FATIGUE BEHAVIOUR OF HIGH VELOCITY OXY-FUEL COATINGS ON MEDIUM CARBON STEEL 2021, 22315381, Penulis Bersama - Co-Author, https://ijettjournal.org/Volume-69/Issue-6/IJETT-V69I6P209.pdf | |
Journal Article : FINITE ELEMENT ANALYSIS OF PISTON FOR STRUCTURAL ASSESSMENTS 2021, 28212835, Penulis Utama - Corresponding Author, https://publisher.uthm.edu.my/ojs/index.php/jsmt/article/view/10340/4711 | |
Journal Article : DYNAMIC RESPONSE ANALYSIS OF FRONTAL CRASH ON VEHICLE AGAINST LIGHTING COLUMN USING FEM 2021, 27166201, Penulis Bersama - Co-Author, http://penerbit.uthm.edu.my/ojs/index.php/jamea | |
Journal Article : DEVELOPMENT OF METAL MATRIX COMPOSITES AND RELATED FORMING TECHNIQUES BY DIRECT RECYCLING OF LIGHT METALS: A REVIEW 2020, 26007916, Penulis Bersama - Co-Author, https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/4338 | |
Journal Article : POTENTIAL APPLICATIONS OF FLY-ASH AND SISAL HYBRID FIBRE REINFORCED PLASTIC COMPOSITES 2020, 23490918, Penulis Utama - Corresponding Author, https://ijettjournal.org/archive/ijett-v68i7p206s | |
Journal Article : SOLUTIONS OF STRESS INTENSITY FACTORS OF SURFACE CRACK IN ROUND BARS UNDER COMBINED BENDING AND TORSION MOMENT USING ANSYS FINITE ELEMENT ANALYSIS 2020, 04532198, Penulis Utama - Corresponding Author, https://www.kansaiuniversityreports.com/article/solutions-of-stress-intensity-factors-of-surface-crack-in-round-bars-under-combined-bending-and-torsion-moment-using-ansys-finite-element-analysis | |
Journal Article : SIMULATION STUDY OF ELLIPTICAL THIN WALLED STRUCTURE CRASH BOX WITH HOLED INITIATOR THROUGH AXIAL AND OBLIQUE IMPACT 2020, 23473983, Penulis Pertama UTHM - First Author, http://www.warse.org/IJETER/static/pdf/file/ijeter09882020.pdf | |
Journal Article : INFLUENCE COEFFICIENTS FOR A SINGLE SUPERFICIAL CRACKED THICK CYLINDER UNDER TORSION AND BENDING MOMENTS 2020, 2229838x, Penulis Pertama UTHM - First Author, https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/5537 | |
Journal Article : STRESS INTENSITY FACTORS OF CRACKS IN SOLID CYLINDRICAL BARS
USING ANSYS FINITE ELEMENT ANALYSIS 2020, 23473983, Penulis Pertama UTHM - First Author, http://www.warse.org/IJETER/static/pdf/file/ijeter74842020.pdf | |
Journal Article : STENT CLASSIFICATIONS AND EFFECT OF GEOMETRIES ON STENT BEHAVIOUR USING FINITE ELEMENT METHOD 2020, 22780149, Penulis Utama - Corresponding Author, http://www.ijmerr.com/uploadfile/2020/0215/20200215061632401.pdf | |
Journal Article : THE INFLUENCE OF GRAPHITIZATION CATALYST ELECTRODE IN ELECTRICAL DISCHARGE MACHINING OF POLYCRYSTALLINE DIAMOND-FINISHING CONDITION 2020, 2229838x, Penulis Bersama - Co-Author, https://www.scopus.com/inward/record.uri?eid=2-s2.0-85081916440&doi=10.30880%2fijie.2020.12.02.025&partnerID=40&md5=4e7967b36b42b1829a228781d70b15d2 | |
Journal Article : COMPARATIVE COMPUTATIONAL STUDY OF MECHANICAL BEHAVIOR IN SELF-EXPANDING FEMOROPOPLITEAL STENTS 2020, 2229838x, Penulis Utama - Corresponding Author, https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/5261 | |
Journal Article : A REVIEW OF SHAPE VARIATIONS AND TEST ANGLES FOR CRASH BOX APPLICATION 2020, 22783091, Penulis Utama - Corresponding Author, http://www.warse.org/IJATCSE/static/pdf/file/ijatcse126912020.pdf | |
Journal Article : A BRIEF OF SOURCES OF INJURY AND FAILURE DURING STENT IMPLANTATION 2020, 23473983, Penulis Utama - Corresponding Author, http://www.warse.org/IJETER/static/pdf/file/ijeter10832020.pdf | |
Journal Article : THE DEVELOPMENT OF REINFORCEMENT PAD DESIGN FOR PRESSURE VESSEL 2020, 22773878, Penulis Utama - Corresponding Author, https://www.ijrte.org/wp-content/uploads/papers/v8i5/D9274118419.pdf | |
Journal Article : EFFECT OF GEOMETRIC SHAPE ON THE CRUSHING PERFORMANCE OF NATURAL JUTE MAT/EPOXY SPECIMENS UNDER AXIAL QUASI-STATIC COMPRESSION 2020, 22496890, Penulis Utama - Corresponding Author, http://www.tjprc.org/view_paper.php?id=12515 | |
Journal Article : PRESSURE VESSEL REINFORCEMENT PAD DESIGN BY FINITE ELEMENT ANALYSIS 2020, 22496890, Penulis Utama - Corresponding Author, http://www.tjprc.org/view_paper.php?id=12473 | |
Journal Article : STATIC AND DYNAMIC ANALYSIS OF SELECTIVE LEVERAGE SYSTEM GEAR TRAIN 2020, 15461963, Penulis Bersama - Co-Author, Tiada | |
Journal Article : INFLUENCE OF GEOMETRICAL SHAPE ON THE CRASHWORTHINESS PERFORMANCE OF TUBULAR JUTE MAT/EPOXY COMPOSITE SPECIMENS 2020, 22272771, Penulis Pertama UTHM - First Author, http://ijens.org/Vol_20_I_02/200202-4747-IJMME-IJENS.pdf | |
Journal Article : MECHANISMS AND TREATMENT OF FEMOROPOPLITEALIN-STENT RESTENOSIS 2019, 01934120, Penulis Pertama UTHM - First Author, http://testmagzine.biz/index.php/testmagzine/issue/view/6 | |
Journal Article : DISTRIBUTION OF MODE I STRESS INTENSITY FACTORS FOR SINGLE CIRCUMFERENTIAL SEMI-ELLIPTICAL CRACK IN THICK CYLINDER 2019, 2229838x, Penulis Utama - Corresponding Author, https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/5066 | |
Journal Article : INFLUENCE OF GEOMETRIC SHAPE ON THE
DEFORMATION PERFORMANCE OF NATURAL
JUTE/EPOXY SPECIMENS UNDER AXIAL QUASI-
STATIC COMPRESSION 2019, 01934120, Penulis Bersama - Co-Author, http://testmagzine.biz/index.php/testmagzine/issue/view/6 | |
Journal Article : THE CHARACTERIZATION OF EGGSHELL WASTE BY USING POLYMERIC FOAM REPLICATION METHOD 2019, 01934120, Penulis Bersama - Co-Author, http://testmagzine.biz/index.php/testmagzine/article/view/152/129 | |
Journal Article : VIBRATION EXPOSURE OF POLYDIMETHYLSILOXANE (PDMS) REINFORCED SILICA (SIO2): COMPARISON OF DIFFERENT SOURCE OF SILICA (SIO2) AS FILLER 2019, 17578981, Penulis Bersama - Co-Author, 10.1088/1757-899X/494/1/012069 | |
Journal Article : A REVIEW OF NON-INVASIVE HAPTIC FEEDBACK STIMULATION TECHNIQUES FOR UPPER EXTREMITY PROSTHESES 2019, 2229-838, Penulis Bersama - Co-Author, https://www.scopus.com/record/display.uri?eid=2-s2.0-85069848471&origin=resultslist&sort=plf-f&src=s&st1=%22A+Review+of+Non-Invasive+Haptic+Feedback+stimulation+Techniques+for+Upper+Extremity+Prostheses%22&st2=&sid=d4e55b6509d422d66d36e91063b3c6e1&sot=b&sdt=b&sl=111&s=TITLE-ABS-KEY%28%22A+Review+of+ | |
Journal Article : COMPOSITION AND TYPE OF A BINDER EFFECTS ON THE STAINLESS STEELFOAM MICROSTRUCTURE PREPARED BY SPONGE REPLICATION METHOD 2019, 2229838x, Penulis Bersama - Co-Author, https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/5060/3187 | |
Journal Article : INVESTIGATION OF TEMPERATURE AND HUMIDITY CONTROL SYSTEM FOR MUSHROOM HOUSE 2019, 2229838x, Penulis Bersama - Co-Author, https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/2991/3056 | |
Journal Article : ENERGY ABSORPTION AND DEFORMATION PATTERN ON TWO SEGMENT CRASH BOX WITH RUBBER CONNECTION VARIATION 2019, 22897879, Penulis Pertama UTHM - First Author, http://www.akademiabaru.com/doc/ARFMTSV55_N1_P20_28.pdf | |
Journal Article : ENERGY ABSORPTION AND DEFORMATION PATTERN ON TWO SEGMENT CRASH BOX WITH RUBBER CONNECTION VARIATION 2019, 22897879, Penulis Bersama - Co-Author, http://www.akademiabaru.com/doc/ARFMTSV55_N1_P20_28.pdf | |
Journal Article : AN ANALYSIS OF BLOOD PRESSURE WAVEFORM USING WINDKESSEL MODEL FOR NORMOTENSIVE AND HYPERTENSIVE CONDITIONS IN CAROTID ARTERY 2019, 22897879, Penulis Utama - Corresponding Author, http://www.akademiabaru.com/doc/ARFMTSV57_N1_P69_85.pdf | |
Journal Article : NUMERICAL ANALYSIS ON THE EFFECT OF NORMOTENSIVE AND HYPERTENSIVE PHYSIOLOGICAL CONDITIONS ONTO HEMODYNAMIC CHARACTERISTICS IN STENTED CAROTID ARTERY 2019, 22272771, Penulis Utama - Corresponding Author, http://ijens.org/Vol_19_I_01/181406-1901-7575-IJMME-IJENS.pdf | |
Journal Article : CALCULATING OF STRESS INTENSITY FACTORS OF SOLDERED JOINTS WITH MULTIPLE CRACKS 2019, 25024752, Penulis Pertama UTHM - First Author, DOI: 10.11591/ijeecs.v14.i1.pp284-289 | |
Journal Article : EFFECTS OF TEMPERATURES AND STRAIN RATE ON THE MECHANICAL
BEHAVIOUR OF COMMERCIAL ALUMINIUM ALLOY AA6061 2019, 22897879, Penulis Bersama - Co-Author, http://www.akademiabaru.com/doc/ARFMTSV54_N1_P21_26.pdf | |
Journal Article : INFLUENCE OF GEOMETRIC SHAPE ON THE
DEFORMATION PERFORMANCE OF NATURAL
JUTE/EPOXY SPECIMENS UNDER AXIAL QUASI-
STATIC COMPRESSION 2019, 01934120, Penulis Pertama UTHM - First Author, http://testmagzine.biz/index.php/testmagzine/issue/view/6 | |
Journal Article : THERMAL GRADIENT PATTERN OF SHALLOW PITTING VIA ACTIVE THERMOGRAPHY ¿ HOT WATER AND STEAM. 2018, 26007916, Penulis Bersama - Co-Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie/issue/view/162 | |
Journal Article : NUMERICAL SIMULATION IN TRANSIENT FLOW OF NON-NEWTONIAN
FLUID IN NOZZLES DURING FILLING PROCESS 2018, 2229838x, Penulis Bersama - Co-Author, file:///C:/Users/Admin/Downloads/1898-8697-1-PB.pdf | |
Journal Article : EFFECT OF PERFORATION SIZE ON SOUND ABSORPTION CHARACTERISTICS OF MEMBRANE ABSORBER 2018, 2229838x, Penulis Bersama - Co-Author, file:///C:/Users/Hafeez/Desktop/PAPER%202018/Sound%20Absorption.pdf | |
Journal Article : MECHANICAL PERFORMANCES OF TWILL KENAF WOVEN FIBER REINFORCED POLYESTER COMPOSITES 2018, 2229838x, Penulis Utama - Corresponding Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/2615 | |
Journal Article : NUMERICAL SIMULATION IN TRANSIENT FLOW OF NON-NEWTONIAN FLUID IN NOZZLES 2018, 2229838x, Penulis Bersama - Co-Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/1898 | |
Journal Article : ICE BATH THERAPY ON ATHLETES RECOVERY RESPONSE USING EEG 2018, 2227524x, Penulis Bersama - Co-Author, https://www.sciencepubco.com/index.php/ijet/article/view/22361 | |
Journal Article : CRUSHING PERFORMANCES OF AXIALLY COMPRESSED WOVEN KENAF
FIBER REINFORCED CYLINDRICAL COMPOSITES 2018, 2229838x, Penulis Utama - Corresponding Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie/article/viewFile/2226/1430 | |
Journal Article : A COMPARATIVE STUDY OF TURBULENCE MODELS ON AERODYNAMICS CHARACTERISTICS OF A NACA0012 AIRFOIL 2018, 2229838x, Penulis Bersama - Co-Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/1901/1426 | |
Journal Article : LUMPED PARAMETER MODELLING IN FEMORAL POPLITEAL ARTERY FOR
NORMAL AND SEVERE CONDITIONS 2018, 2229-838, Penulis Bersama - Co-Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/3116/1717 | |
Journal Article : AN OVERVIEW OF FRACTURE MECHANICS WITH ANSYS 2018, 2229838x, Penulis Utama - Corresponding Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/2938/1697 | |
Journal Article : EXPERIMENTAL STUDY ON THE DEGREE OF SURFACE GENERATION BY EDGE PREPARATION TOOLS IN MILLING 316L 2018, 2227-524, Penulis Bersama - Co-Author, https://www.sciencepubco.com/index.php/ijet/article/view/24784 | |
Journal Article : THERMAL GRADIENT PATTERN OF SHALLOW PITTING VIA ACTIVE THERMOGRAPHY-WATER AND STEAM 2018, 2229838x, Penulis Bersama - Co-Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/1953 | |
Journal Article : CLASSIFICATION FOR DAMAGE SEVERITY IN NATURAL FIBRE COMPOSITES USING PRINCIPAL COMPONENT ANALYSIS 2018, 2229838x, Penulis Bersama - Co-Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/2246/1941 | |
Journal Article : SEASHELL STRUCTURE UNDER BINDER INFLUENCE 2018, 22897879, Penulis Bersama - Co-Author, http://www.akademiabaru.com/doc/ARFMTSV46_N1_P122_128.pdf | |
Journal Article : ELECTRICAL DISCHARGE MACHINING OF POLYCRYSTALLINE DIAMOND USING COPPER ELECTRODE - FINISHING CONDITION 2017, 1757899x, , http://iopscience.iop.org/article/10.1088/1757-899X/203/1/012019/pdf | |
Journal Article : THE INFLUENCE OF INJECTION MOLDING PARAMETER ON PROPERTIES OF THERMALLY CONDUCTIVE PLASTIC 2017, 1757899x, , http://iopscience.iop.org/article/10.1088/1757-899X/203/1/012018/pdf | |
Journal Article : INTERACTIONS OF DOUBLE SLANTED CRACKS UNDER MODE I MODELLING 2017, 2261236x, Penulis Utama - Corresponding Author, https://doi.org/10.1051/matecconf/201710812003 | |
Journal Article : OPTIMIZATION OF SOUND ABSORBERS NUMBER AND PLACEMENT IN AN ENCLOSED ROOM BY FINITE ELEMENT SIMULATION 2017, 17426596, , http://iopscience.iop.org/article/10.1088/1742-6596/914/1/012037/meta | |
Journal Article : FINITE ELEMENT ANALYSIS OF J-INTEGRAL FOR SURFACE CRACKS IN ROUND BARS UNDER COMBINED MODE I LOADING 2017, 2229838x, Penulis Utama - Corresponding Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie | |
Journal Article : TECHNOLOGY MODEL OF AQUACULTURE PRODUCTION SYSTEM 2017, 17426588, Penulis Bersama - Co-Author, http://iopscience.iop.org/article/10.1088/1742-6596/914/1/012040/meta | |
Journal Article : NUMERICAL SIMULATION OF HYBRID COMPOSITE TUBES UNDER OBLIQUE COMPRESSION 2017, 17085284, Penulis Utama - Corresponding Author, http://www.emeraldinsight.com/toc/wje/14/2 | |
Journal Article : FRACTURE ENERGY OF WOVEN FABRIC KENAF COMPOSITE PLATES WITH DIFFERENT FIBER ORIENTATIONS 2017, 02555476, Penulis Bersama - Co-Author, https://www.scientific.net/MSF.882.56 | |
Journal Article : INFLUENCE OF ALKALI RESISTANT (AR) FIBREGLASS IN PORCELAIN CLAY FOR MANUFACTURING VITRIFIED CLAY PIPES 2017, 17426588, Penulis Bersama - Co-Author, https://iopscience.iop.org/article/10.1088/1742-6596/914/1/012020 | |
Journal Article : EFFECT OF TRIGGERING ANGLES ON THE CRUSHING MECHANISMS OF HYBRID WOVEN KENAF/ALUMINUM HOLLOW CYLINDERS 2017, 17426588, Penulis Utama - Corresponding Author, http://iopscience.iop.org/article/10.1088/1742-6596/914/1/012034/meta | |
Journal Article : MODE I STRESS INTENSITY FACTORS OF SLANTED CRACKS 2017, 18196608, Penulis Utama - Corresponding Author, http://www.arpnjournals.com/jeas/volume_10_2017.htm | |
Journal Article : FEASIBILITY STUDY OF PCB MOBILES PHONES AND RECYCLING THROUGH MANUAL DISMANTLING AND HYDRO METALLURGICAL METHOD 2016, 18196608, Penulis Bersama - Co-Author, http://arpnjournals.com/jeas/archive.htm | |
Journal Article : CRUSHING PERFORMANCES OF WINDING SQUARE KENAF FIBER REINFORCED COMPOSITES 2016, 2077124x, Penulis Tunggal, http://ijens.org/IJENS%20Vol%2016%20Issue%2004.html | |
Journal Article : EFFECT OF MEMBRANE SURFACE TENSION AND BACKED-AIR GAP
DISTANCE ON SOUND ABSORPTION CHARACTERISTICS 2016, 18196608, Penulis Bersama - Co-Author, http://arpnjournals.com/jeas/archive.htm | |
Journal Article : MODE III STRESS INTENSITY FACTORS OF
SICKLE-SHAPED SURFACE CRACKS
IN ROUND BARS 2016, 18235514, Penulis Tunggal, http://jmeche.uitm.edu.my/index.php/journal/volume-13-no-1 | |
Journal Article : MODE I STRESS INTENSITY FACTORS OF SICKLE-SHAPED SURFACE CRACKS IN ROUND SOLID BARS
UNDER BENDING MOMENT 2016, 21801606, Penulis Tunggal, https://doi.org/10.15282/ijame.13.2.2016.4.0276 | |
Journal Article : STRESS INTENSITY FACTORS OF DOUBLE EDGE CRACKS IN LARGE GROOVE PLATES UNDER MODE I TENSION 2016, 17578981, Penulis Utama - Corresponding Author, http://iopscience.iop.org/article/10.1088/1757-899X/152/1/012049 | |
Journal Article : KENAF FIBER REINFORCED COMPOSITE TUBES AS ENERGY ABSORBING STRUCTURES 2016, 22272771, Penulis Tunggal, http://ijens.org/IJMME%20Vol%2016%20Issue%2001.html | |
Journal Article : CRUSHING MECHANISMS OF CYLINDRICAL WINDING KENAF FIBER REINFORCED COMPOSITES 2016, 21803722, Penulis Tunggal, www.jurnalteknologi.utm.my | |
Journal Article : OBLIQUE CRUSHING PERFORMANCES OF KENAF/ALUMINUM COMPOSITE TUBES 2016, 09734562, Penulis Tunggal, http://www.ripublication.com/Volume/ijaerv11n8.htm | |
Journal Article : THE EFFECT OF CUSTOMIZED WOVEN AND STACKED LAYER ORIENTATION ON TENSILE AND FLEXURAL PROPERTIES OF WOVEN KENAF FIBRE REINFORCED EPOXY COMPOSITES 2016, 16879422, Penulis Bersama - Co-Author, https://www.hindawi.com/journals/ijps/2016/6514041/abs/ | |
Journal Article : THE BONDED MACRO FIBER COMPOSITE (MFC) AND WOVEN KENAF EFFECT ANALYSES ON THE MICRO ENERGY HARVESTER PERFORMANCE OF KENAF PLATE USING MODAL TESTING AND TAGUCHI METHOD 2016, 13928716, Penulis Bersama - Co-Author, https://www.researchgate.net/profile/Ahmad_Hamdan3/publication/301554095_The_bonded_macro_fiber_composite_MFC_and_woven_kenaf_effect_analyses_on_the_micro_energy_harvester_performance_of_kenaf_plate_using_modal_testing_and_Taguchi_method/links/57198f3e08aed43f632356c5.pdf?origin=publication_detail | |
Journal Article : AXIAL ENERGY ABSORPTION OF WOVEN KENAF FIBER REINFORCED COMPOSITES | |
Journal Article : CRUSHING MECHANISMS OF CYLINDRICAL WINDING KENAF FIBER REINFORCED COMPOSITES 2016, 1279696, Penulis Tunggal, http://www.jurnalteknologi.utm.my/index.php/jurnalteknologi/article/view/5258 | |
Journal Article : KENAF FIBER REINFORCED COMPOSITES TUBES AS ENERGY ABSORBING STRUCTURES | |
Journal Article : A REVIEW ON CARBON NANOTUBES REINFORCED CERAMIC COMPOSITE 2016, 18196608, , https://www.scopus.com/inward/record.uri?eid=2-s2.0-84977080699&partnerID=40&md5=026c61465b7157e4547b220545f43585 | |
Journal Article : TENSILE STRENGTH OF WOVEN YARN KENAF FIBER REINFORCED POLYESTER COMPOSITES 2015, 22894659, Penulis Utama - Corresponding Author, http://jmes.ump.edu.my/ | |
Journal Article : INVESTIGATION ON THE FRETTING WEAR OF A COATED SUBSTRATE: INTERLAYER
STRESS BEHAVIOUR 2015, 16627482, Penulis Bersama - Co-Author, https://www.scientific.net/AMM.699.311 | |
Journal Article : ECCENTRIC CRUSHING BEHAVIOUR OF HIGH STRENGTH STEEL 2015, 22272771, Penulis Utama - Corresponding Author, http://ijens.org/IJMME%20Vol%2015%20Issue%2005.html | |
Journal Article : LATERAL CRUSHING ENERGY ABSORPTION OF CYLINDRICAL KENAF FIBER REINFORCED COMPOSITES 2015, 09734562, Penulis Utama - Corresponding Author, http://www.ripublication.com/Volume/ijaerv10n8.htm | |
Journal Article : STRESS INTENSITY FACTORS UNDER COMBINED BENDING AND TORSION MOMENTS 2012, 1673565x, Penulis Bersama - Co-Author, DOI: 10.1631/jzus.A1100040 | |
Journal Article : STRESS INTENSITY FACTORS UNDER COMBINED BENDING AND TORSION MOMENTS 2012, 1673565x, Penulis Utama - Corresponding Author, DOI: 10.1631/jzus.A1100040 | |
Journal Article : STRESS INTENSITY FACTORS FOR SURFACE CRACKS IN ROUND BAR UNDER SINGLE AND COMBINED LOADINGS 2011, 00256455, Penulis Utama - Corresponding Author, https://link.springer.com/article/10.1007/s11012-011-9500-7 | |
Journal Article : KESAN KEKERASAN PERMUKAAN TERHADAP PERMULAAN RETAK LESU KELULI SINTER | |
Book Chapter : STRUCTURAL HEALTH MONITORING SYSTEM FOR SYNTHETIC, HYBRID AND NATURAL FIBER COMPOSITES 2021, 9789811588402, Penulis Dalam Bab, https://link.springer.com/chapter/10.1007/978-981-15-8840-2_13#citeas | |
Book Chapter : STRUCTURAL HEALTH MONITORING SYSTEM FOR SYNTHETIC, HYBRID AND NATURAL FIBER COMPOSITES. COMPOSITES SCIENCE AND TECHNOLOGY 2021, 9789811588402, Penulis Dalam Bab, https://link.springer.com/chapter/10.1007/978-981-15-8840-2_14 | |
Book Chapter : ADVANCES IN MECHANICAL, MANUFACTURING AND AEROSPACE ENGINEERING, SERIES 1 2020, 9789672916567, Penulis Bersama - Co-Author, file:///C:/Users/TOSHIBA/Downloads/Book%20Chapter%20Series%201%202020.pdf | |
Book Chapter : ADVANCES IN MECHANICAL, MANUFACTURING AND AEROSPACE ENGINEERING: SERIES 1 2020, 9789672916567, Penulis Dalam Bab, Tiada | |
Book Chapter : MODELLING OF DAMAGE PROCESSES IN BIOCOMPOSITES, FIBRE-REINFORCED COMPOSITES AND HYBRID COMPOSITES 2019, 9780081022894, Penulis Dalam Bab, https://www.sciencedirect.com/science/article/pii/B9780081022894000035 | |
Book Chapter : GREEN MATERIAL FOR ENGINEERING APPLICATION 2019, 9789672216797, Penulis Dalam Bab, Tiada | |
Book Chapter : GREEN MATERIAL FOR ENGINEERING APPLICATION 2019, 9789672216797, Penulis Dalam Bab, Tiada | |
Book Chapter : GREEN MATERIAL FOR ENGINEERING APPLICATION 2019, 9789672216797, Penulis Bersama - Co-Author, Tiada | |
Book Chapter : MODELLING OF DAMAGE PROCESSES IN BIOCOMPOSITES, FIBRE-REINFORCED COMPOSITES AND HYBRID COMPOSITES 2019, 9780081022894, Penulis Bersama - Co-Author, https://www.sciencedirect.com/science/article/pii/B9780081022894000060 | |
Book Chapter : Modelling of Damage Processes in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites 2019, 9780081022894, Penulis Dalam Bab, https://www.sciencedirect.com/science/article/pii/B9780081022894000047 | |
Book Chapter : MODELLING OF DAMAGE PROCESSES IN BIOCOMPOSITES, FIBRE-REINFORCED COMPOSITES AND HYBRID COMPOSITES 2018, 9780081022894, Penulis Bersama - Co-Author, Tiada | |
Book : ADVANCES IN MECHANICAL, MANUFACTURING AND AEROSPACE ENGINEERING: SERIES 1 2020, 9789672916567, Penulis Pertama UTHM - First Author, Tiada | |
Book : STEP-BY-STEP SOLUTIONS: PROBLEMS IN SOLID MECHANICS 2 2020, 9789672216995, Penulis Pertama UTHM - First Author, Tiada | |
Book : GREEN MATERIALS FOR ENGINEERING APPLICATIONS 2019, 9789672216797, Penulis Utama - Corresponding Author, Tiada | |
Book : RETAK PADA SILINDER PADU: PENDEKATAN MEKANIK PATAH 2015, 9789670764238, Penulis Utama - Corresponding Author, Tiada | |
Book : MECHANICAL & MANUFACTURING ENGINEERING 2013, 978303785635 2, Penyunting, http://www.ttp.net/978-3-03785-635-2.html | |
Book : INTERACTING CRACK ANALYSIS USING FINITE ELEMENT METHOD 2012, 9789535108979, Penulis Bersama - Co-Author, http://www.intechopen.com/books/applied-fracture-mechanics/interacting-cracks-analysis-using-finite-element-method | |
Book : ABSTRACT BOOK OF INTERNATIONAL CONFERENCE ON MECHANICAL & MANUFACTURING ENGINEERING (ICME2012) 2012, 3215776301, Penyunting, fkmp.uthm.edu.my/icme2012 | |
Book : ABSTRACT BOOK OF INTERNATIONAL CONFERENCE ON MECHANICAL & MANUFACTURING ENGINEERING (ICME2008) 2008, 9789832963592, Penyunting, - | |
Policy Paper : | |
Policy Paper : | |
Conference / Seminar : INFLUENCE OF MESH SIZES AND ORIENTATIONS ON EXPANDED ALUMINIUM SHEETS ON TENSILE PERFORMANCES | |
Conference / Seminar : DESIGN AND MANUFACTURE A DUST SENSING DEVICE TO MONITOR BREATHING AIR | |
Conference / Seminar : INVESTIGATION OF CRASH IMPACT TOWARD THE HIGHWAY IMPACT ATTENUATOR STRUCTURE USING FINITE ELEMENT ANALYSIS | |
Conference / Seminar : FINITE ELEMENT ANALYSIS OF REAR UNDERRUN PROTECTION DEVICE DURING | |
Conference / Seminar : FINITE ELEMENT ANALYSIS OF PIPELINE UPHEAVAL BUCKLING WITH DIFFERENT INITIAL IMPERFECTIONS
| |
Conference / Seminar : FINITE ELEMENT ANALYSIS OF PIPELINE UPHEAVAL BUCKLING WITH DIFFERENT INITIAL IMPERFECTIONS | |
Conference / Seminar : CONCEPTUAL DESIGN OF REVERSE VENDING MACHINE (RVM): FINITE ELEMENT ANALYSIS | |
Conference / Seminar : SIMULATION STUDY OF ELLIPTICAL THIN-WALLED STRUCTURE CRASH BOX WITH HOLED INITIATOR THROUGH AXIAL IMPACT
| |
Conference / Seminar : ENHANCEMENT OF SOLAR STILL PRODUCTION
| |
Conference / Seminar : INTERACTION OF SURFACE CRACK ON SOLID SHAFT DUE TO COMBINED LOADING | |
Conference / Seminar : CHARACTERIZATION OF CONTINUOUS GRADIENT FUNCTIONALLY GRADED NATURAL FIBER REINFORCED POLYMER COMPOSITES | |
Conference / Seminar : PRELIMINARY OF FINITE ELEMENT ANALYSIS (FEA) INVESTIGATION ON THE STENT EXPANSION | |
Conference / Seminar : SOUND INSERTION LOSS OF KENAF AND ARENGA PINNATA | |
Conference / Seminar : PRELIMINARY STUDIES ON DESIGN OF PHOTOVOLTAIC THERMAL (PVT) SOLAR COLLECTOR FOR ROOFING SYSTEM APPLICATION. | |
Conference / Seminar : DOUBLE SURFACE CRACKS INTERACTION ON CYLINDRICAL ROD UNDER TENSILE AND TORSIONAL LOADING | |
Conference / Seminar : THE INVESTIGATION OF FIBRE ORIENTATION EFFECT IN CRASHWORTHINESS OF KENAF AND HYBRID KENAF/GLASS FIBER COMPOSITE
| |
Conference / Seminar : PORTABLE MINI TURNTABLE FOR CLOSE-RANGE PHOTOGRAMMETRY: A PRELIMINARY STUDY | |
Conference / Seminar : APPLICATION OF DESIGN FOR SIX SIGMA (DFSS) IN SUSTAINABLE PRODUCT DESIGN: A CASE STUDY ON AN ELECTRIC KETTLE | |
Conference / Seminar : AN INTEGRATION OF KANO MODEL AND QUALITY FUNCTION DEPLOYMENT TECHNIQUE
- A CASE STUDY USING SPORT EARPHONE | |
Conference / Seminar : ARTIFICIAL NEURAL NETWORK APPLICATION FOR DAMAGES CLASSIFICATION IN FIBREGLASS PRE-IMPREGNATED LAMINATED COMPOSITES (FGLC) FROM ULTRASONIC SIGNAL | |
Conference / Seminar : KANO MODEL AND WEIGHTED RATING EVALUATION METHOD FOR PRODUCT LIFECYCLE IMPROVEMENT | |
Conference / Seminar : QUASI-STATIC AXIAL CRUSHES ON WOVEN JUTE/POLYESTER AA6063T52 COMPOSITE TUBES | |
Conference / Seminar : THE AXIAL CRUSHES BEHAVIOUR ON FOAM-FILLED ROUND JUTE/POLYESTER COMPOSITE TUBES | |
Conference / Seminar : HARDNESS AND WEAR RATE OF AL LM6 HOLLOW CYLINDER FABRICATED USING CENTRIFUGAL METHOD | |
Conference / Seminar : HARDNESS AND WEAR RATE OF AL LM6 HOLLOW CYLINDER FABRICATED
USING HORIZONTAL CENTRIFUGAL CASTING | |
Conference / Seminar : CATALYTIC AIDED ELECTRICAL DISCHARGE MACHINING OF POLYCRYSTALLINE DIAMOND - PARAMETER ANALYSIS OF FINISHING CONDITION | |
Conference / Seminar : FINITE ELEMENT MODELLING OF AA6063T52 THIN-WALLED TUBES UNDER QUASI-STATIC AXIAL LOADING | |
Conference / Seminar : STRESS INTENSITY FACTORS AND INTERACTION OF TWO PARALLEL SURFACE CRACKS ON CYLINDER UNDER TENSION | |
Conference / Seminar : INTERACTIONS OF DOUBLE SLANTED CRACKS UNDER MODE I LOADING | |
Conference / Seminar : OBLIQUE CRUSHING PERFORMANCES OF HYBRID WOVEN KENAF FIBRE REINFORCED
ALUMINIUM HOLLOW CYLINDER | |
Conference / Seminar : DEFLECTION OF ELASTIC BEAM WITH SMA WIRES ECCENTRICALLY INSERTED | |
Conference / Seminar : OBLIQUE CRUSHING PERFORMANCES OF HYBRID WOVEN KENAF FIBRE REINFORCED ALUMINIUM HOLLOW CYLINDER | |
Conference / Seminar : RESIDUAL STRESSES IN SHAPE MEMORY ALLOY FIBER REINFORCED ALUMINIUM MATRIX COMPOSITE | |
Conference / Seminar : BINDER EFFECT ON SEASHELL STRUCTURE | |
Conference / Seminar : MODELLING DYNAMIC BEHAVIOUR AND SPALL FAILURE OF ALUMINIUM ALLOY AA7010 | |
Conference / Seminar : EFFECT OF ROTATING MOLD SPEED ON MICROSTRUCTURE OF AL LM6 HOLLOW CYLINDER FABRICATED USING CENTRIFUGAL METHOD | |
Conference / Seminar : FLOW CHARACTERISTICS NEAR TO STENT STRUT CONFIGURATIONS ON FEMOROPOPLITEAL ARTERY | |
Conference / Seminar : AN EVALUATION OF MECHANICAL PROPERTIES ON KENAF NATURAL FIBER/POLYESTER COMPOSITE STRUCTURES AS TABLE TENNIS BLADE | |
Conference / Seminar : INVESTIGATION ON SUITABILITY OF NATURAL FIBRE AS REPLACEMENT MATERIAL FOR TABLE TENNIS BLADE | |
Conference / Seminar : INTER-RATER RELIABILITY OF THE NEW OBSERVATIONAL METHOD FOR ASSESSING AN EXPOSURE TO RISK FACTORS RELATED TO WORK-RELATED MUSCULOSKELETAL DISORDERS (WMSDS) | |
Conference / Seminar : COMPUTATIONAL ANALYSIS ON STENT GEOMETRIES IN CAROTID ARTERY: A REVIEW | |
Conference / Seminar : STRESS INTENSITY FACTORS OF SLANTED CRACKS IN BI-MATERIAL PLATES | |
Conference / Seminar : COMBINED MODE I STRESS INTENSITY FACTORS OF SLANTED CRACKS | |
Conference / Seminar : DESIGN AND DEVELOPMENT OF A PORTABLE METAL CHIP BALER USING A SYSTEM DESIGN APPROACH | |
Conference / Seminar : EFFECT OF PRESSURE ON THE CO2 ABSORPTION INTO LADLE FURNACE SLAG | |
Conference / Seminar : PERIODIC BOUNDARY CONDITION TECHNIQUE ON CARBON FIBRE
COMPOSITES | |
Conference / Seminar : APPLICATION OF DESIGN FOR SIX SIGMA METHODOLOGY ON PORTABLE WATER FILTER THAT USES MEMBRANE FILTRATION SYSTEM: A PRELIMINARY STUDY | |
Conference / Seminar : REVIEW OF CO2 REDUCTION TECHNOLOGIES USING MINERAL CARBONATION OF IRON AND STEEL MAKING SLAG IN MALAYSIA | |
Conference / Seminar : SOLUTIONS OF STRESS INTENSITY FACTORS OF MULTIPLE INTERNAL AXIAL CRACKS IN HOLLOW CYLINDERS | |
Conference / Seminar : AXIAL QUASI-STATIC CRUSHING BEHAVIOUR OF CYLINDRICAL WOVEN KENAF FIBER REINFORCED COMPOSITES | |
Conference / Seminar : PREFACE | |
Conference / Seminar : A REVIEW ON FRACTURE PREVENTION OF STENT IN FEMOROPOPLITEAL ARTERY | |
Conference / Seminar : OPTIMIZATION ON IMPACT STRENGTH OF WOVEN KENAF REINFORCED POLYESTER COMPOSITES USING TAGUCHI METHOD | |
Conference / Seminar : A REVIEW OF STENTS FAILURE ON PATENT DUCTUS ARTERIOSUS | |
Conference / Seminar : MODE I STRESS INTENSITY FACTORS OF SLANTED CRACKS IN PLATES | |
Conference / Seminar : IMPACT STRENGTH OF DIFFERENT WEAVING PATTERNS OF WOVEN KENAF REINFORCED POLYESTER COMPOSITES | |
Conference / Seminar : OBLIQUE CRUSHING PERFORMANCES OF HYBRID WOVEN KENAF FIBRE REINFORCED ALUMINIUM HOLLOW CYLINDER
| |
Conference / Seminar : PRELIMINARY STUDY ON KANO MODEL IN THE CONCEPTUAL DESIGN ACTIVITIES FOR PRODUCT LIFECYCLE IMPROVEMENT | |
Conference / Seminar : IMPLEMENTATION OF FINITE STRAIN-BASED CONSTITUTIVE FORMULATION IN LLLNL-DYNA3D TO PREDICT SHOCKWAVE PROPAGATION IN COMMERCIAL ALUMINUM ALLOYS AA7010 | |
Conference / Seminar : DEVELOPMENT IN GEARED TURBOFAN AEROENGINE | |
Conference / Seminar : FRACTURE TOUGHNESS OF WOVEN KENAF FIBRE REINFORCED
COMPOSITES | |
Conference / Seminar : EFFECT OF HYBRIDIZED FIBER WRAPPED AROUND THE ALUMINUM TUBES ON THE CRUSHING PERFORMANCES | |
Conference / Seminar : MOTIVATION TOWARDS HOMESTAY ENTREPRENEURS: CASE STUDY IN THE STATE OF JOHOR. | |
Conference / Seminar : STRESS INTENSITY FACTORS OF SLANTED CRACKS IN ROUND BARS SUBJECTED TO MODE I TENSION LOADING | |
Conference / Seminar : STRESS INTENSITY FACTORS OF SLANTED CRACKS IN ROUND BARS SUBJECTED TO MODE I TENSION LOADING | |
Conference / Seminar : FATIGUE STRENGTH OF WOVEN KENAF FIBER REINFORCED COMPOSITES | |
Conference / Seminar : MODELLING ANALYSIS ON MECHANICAL DAMAGE OF KENAF REINFORCED COMPOSITE PLATES UNDER OBLIQUE IMPACT LOADINGS | |
Conference / Seminar : MODELLING HIGH VELOCITY IMPACT ON ALUMINIUM ALLOY 7075-T6 UNDER AXIAL PRETENSION | |
Conference / Seminar : LOW VELOCITY IMPACT ON WOVEN KENAF FIBER REINFORCED COMPOSITES | |
Conference / Seminar : EFFECT OF VELOCITY ON THE IMPACT RESISTANCE OF WOVEN JUTE FIBER REINFORCED COMPOSITES | |
Conference / Seminar : DEVELOPING INNOVATIVE TOOLS FOR DELIVERING HIGHQUALITY OF ENGINEERING EDUCATION: MEANS TO ENHANCE STIDENT'S QUALITY | |
Conference / Seminar : FINITE ELEMENT SIMULATION AND MODELING OF AXIAL DYNAMICS ENERGY ABSORPTION ON CONICAL TITANIUM ALLOY | |
Conference / Seminar : PROBABILISTIC ANALYSIS OF SURFACE CRACKS IN ROUND BARS UNDER TENSION LOADING | |
Conference / Seminar : PROBABILISTIC ANALYSIS OF SURFACE CRACK IN ROUND BARS UNDER BENDING MOMENTS | |
Conference / Seminar : NON-LINEAR NUMERICAL SIMULATION OF DYNAMIC ENERGY ABSORPTION ON UNFILLED AND FOAM-FILLED COTTON FIBRE/POLYPYLENE CORRUGATED OF TUBULAR STRUCTURE | |
Conference / Seminar : ELASTIC-PLASTIC ANALYSIS OF SURFACE CRACK IN ROUND BARS UNDER TORSION | |
Conference / Seminar : COMPUTATION OF STRESS INTENSITY FACTOR FOR MULTIPLE CRACKS USING SINGULAR FINITE ELEMENT | |
Conference / Seminar : ELASTIC-PLASTIC ANALYSIS OF SURFACE CRACKS IN ROUND BARS UNDER BENDING MOMENTS | |
Conference / Seminar : MODE III STRESS INTENSITY FACTOR OF SURFACE CRACK IN ROUND BARS | |
Conference / Seminar : J-INTEGRAL ANALYSIS OF SURFACE CRACKS IN ROUND BARS UNDER BENDING MOMENT | |
Conference / Seminar : J-INTEGRAL ANALYSIS OF SURFACE CRACKS IN ROUND BARS UNDER TENSION LOADINGS | |
Conference / Seminar : J-INTEGRAL EVALUATION IN TWO DIMENSIONAL INTERACTING CRACKS | |
Conference / Seminar : ELASTIC-PLASTIC ANALYSIS OF SURFACE CRACKS IN ROUND BARS UNDER TENSION STRESS | |
Conference / Seminar : ANALISIS KAMIRAN-J PADA BAR YANG MENGANDUNGI RETAK PERMUKAAN KENAAN MOMEN LENTUR | |
Conference / Seminar : THE EFFECT OF TEMPERING TEMPERATURES TO CRACK NUCLEATION IN SINTERED STEEL UNDER BIAXIAL CYCLIC LOADING | |
Conference / Seminar : PROBABILISTIC ANALYSIS OF THE HUMAN LUMBAR SPINE ASSOCIATED FINITE ELEMENT MODEL | |
Conference / Seminar : ELASTIC-PLASTIC ANALYSIS OF SURFACE CRACK IN ROUND BARS UNDER TORSION LOADING | |
Conference / Seminar : APPLICATION OF HIGH CYCLE MULTIAXIAL FATIGUE CRITERIA IN PROBABILISTIC ANALYSIS | |
Conference / Seminar : PROBABILISTIC ASSESSMENTS OF THE PLATE USING MONTE CARLO SIMULATION | |
Conference / Seminar : OPTIMIZATION OF THE SIMPLE PLATE USING HIGH CYCLE MULTIAXIAL FATIQUE CRITERIA | |
Conference / Seminar : CRUSHING CHARACTERISTIC OF FOAM-FILLED COLUMNS | |
Conference / Seminar : CRUSHING BEHAVIOR OF FOAM-FILLED COLUMNS | |
Conference / Seminar : CRUSHING BEHAVIOR OF FOAM-FILLED STEEL EXTRUSIONS | |
Conference / Seminar : CRUSHING BEHAVIOR OF RIGID POLYMERIC FOAM-FILLED STEEL UNDER QUASI-STATIC COMPRESSIVE LOADING | |
Conference / Seminar : TENSILE AND IMPACT BEHAVIOR OF HYBRID EXTRUDED GLASS/NATURAL FIBERS REINFORCED POLYESTER COMPOSITES | |
Conference / Seminar : QUASI-STATIC ENERGY ABSORPTION CAPABILITIES OF FOAM-FILLED STEEL EXTRUSION TUBES | |
Conference / Seminar : SOUND GENERATED DURING THE COMPACTION OF ALUMINA REINFORCED ALUMINUM POWDERS | |
Conference / Seminar : EFFECT OF TEMPERATURE ON TENSILE BEHAVIOR OF HYBRID EXTRUDED GLASS/NATURAL FIBER REINFORCED POLYESTER COMP | |
Conference / Seminar : TENSILE PROPERTEIS OF STIRRED SIC REINFORCED LM25 ALUMINUM ALLOY | |
Conference / Seminar : TENSILE PROPERTIES OF HYBRID EXTRUDED GLASS/ NATURAL FIBERS REINFORCED POLYPROPYLENE COMPOSITES AT HIGH TEMPERATURES
| |
Conference / Seminar : TENSILE PROPERTIES OF HYBRID EXTRUDED GLASS/NATURAL FIBERS REINFORCED POLYPROPYLENE COMPOSITES AT HIGH TEMPERATURE | |
Conference / Seminar : WATER ABSORPTION EFFECT ON THE TENSILE BEHAVIOR OF COIR FIBER REINFORCED COMPOSITE | |
Conference / Seminar : DYNAMIC CHARACTERISTICS OF NATURAL FIBER REINFORCED COMPOSITES | |
Conference / Seminar : ACOUSTIC ACTIVITIES OF POWDER COMPACTION OF ALUMINA REINFORCED ALUMINIUM ALLOY USING DIFFERENT MOULD SURFACE ROUGHNESSES
| |
Conference / Seminar : CRASHWORTHINESS BEHAVIOR OF AXIALLY CRUSHED STEEL EXTRUSION FILLED WITH POLYMERIC FOAM | |
Conference / Seminar : CRUSHING BEHAVIOR OF FOAM-FILLED STEEL EXTRUSIONS SUBJECTED TO AXIAL QUASI-STATIC COMPRESSIVE LOADINGS | |
Conference / Seminar : DYNAMIC ENERGY ABSORPTION OF CONICAL FILAMENT WOUND COMPOSITES | |
Conference / Seminar : EFFECT OF SURFACE ROUGHNESS ON THE POWDER COMPACTION BEHAVIOR OF ALUMINA REINFORCED ALUMINUM ALLOY | |
Conference / Seminar : FATIGUE BEHAVIOR OF STIRRED SIC REINFORCED LM6 ALUMINUM COMPOSITES: EFFECT OF BLADE ANGLE AND STIRRING SPEEDS | |
Conference / Seminar : FRACTURE MECHANISMS OF NATURAL FIBRE REINFORCE COMPOSITE AT HIGH TEMPERATURES | |
Conference / Seminar : HIGH TEMPERATURE TENSILE PROPERTEIS OF NATURAL FIBRE REINFORCED COMPOSITES | |
Conference / Seminar : LOW VELOCITY IMPACT ENERGY ABSORPTION OF CONICAL FILAMENT WINDING COMPOSITES | |
Conference / Seminar : TENSILE BEHAVIOR OF HYBRID NATURAL/GLASS FIBERS REINFORCED COMPOSITES AT DIFFERENT TEMPERATURES | |
Conference / Seminar : CYCLIC BEHAVIOUR OF HEAT-TREATED SINTERED STEEL TREATED UNDER DIFFERENT TEMPERING TEMPERATURES | |
Conference / Seminar : EFFECT OF AGING TREATMENT ON TENSILE PROPERTEIS OF NATURAL FIBRE REINFORCED POLYESTER COMPOSITES | |
Conference / Seminar : TOUGHENING MECHANISMS OBSERVATION OF TREATED NATURAL FIBRE REINFORCED COMPOSITE UNDER TENSILE AND IMPACT LOADINGS | |
Conference / Seminar : THE EFFECT OF BUCKLING TOWARDS THE STRENGTH OF FRP PULTRUDED COMPOSITE COLUMN | |
Conference / Seminar : TENSILE PROPERTY OF SILANE TREATED NATURAL FIBRE REINFORCED COMPOSITE | |
Conference / Seminar : TENSILE PROPERTEIS OF AGED NATURAL FIBRE REINFORCED POLYESTER COMPOSITES | |
Conference / Seminar : SEM OBSERVATION OF FATIGUE CRACK NUCLEATION MECHANISMS IN SINTERED STEEL | |
Conference / Seminar : QUASI-STATIC ENERGY ABSORPTION PERFORMANCE OF CONICAL NATURAL/GLASS FIBRE COMPOSITES | |
Conference / Seminar : EFFECT OF FLEXURAL STRENGTH OF 10% SIC REINFORCED LM6 ALUMINUM COMPOSITE USING DIFFERENT BLADE ANGLE AND STIRRING SPEED | |
Conference / Seminar : ELECTRICAL DISCHARGE MACHINING OF ALUMINUM ALLOY AND ALUMINUM MMC USING TAGUCHI METHOD | |
Conference / Seminar : ENEGY ABSORPTION OF PULTRUDED TUBES CONTAINING DIFFERENT CHAMFERING ANGLES | |
Conference / Seminar : ENERGY ABSORPTION PERFORMANCE OF CONICAL NATURAL FIBRE REINFORCED COMPOSITES | |
Conference / Seminar : EXPERIMENTAL INVESTIGATION OF ENERGY ABSORPTION PERFORMANCE OF CORRUGATED TUBES UNDER QUASI-STATIC LOADING | |
Conference / Seminar : MECHANICAL DEFORMATION OF HYBRID NATURAL/GLASS FIBRE REINFORCED COMPOSITES | |
Conference / Seminar : POWDER COMPACTION OF SIC REINFORCED COMPOSITE | |
Conference / Seminar : POWDER COMPACTION STUDIES ON ALUMINA REINFORCED ALUMINUM ALLOY USING NON-DESTRUCTUVE TECHNIQUE | |
Conference / Seminar : INVESTIGATION ON PENETRATION RESISTANCE OF MESHLESS 7075-T651 ALUMINUM ALLOY: SIMULATION PREDICTION APPROACH | |
Conference / Seminar : IMPACT BEHAVIOR OF OIL-PALM FINRE REINFORCED COMPOSITES | |
Conference / Seminar : FATIGUE CRACK NUCLEATION IN SINTERED STEEL | |
Conference / Seminar : EFFECT OF EMPTY FRUIT BUNCH (EFB) FIBRE REINFORCED LOW DENSITY POLYETHYLENE EPOXY (LDPE) COMPOSITES ON MECHANICAL PROPERTEIS | |
Conference / Seminar : UTILIZING NATURAL FIBRE AS REINFORCING TOOL IN POLYMERIC COMPOSITE FOR STRUCTURAL MATERIAL: EFFECT OF AGING TREATMENTS | |
Conference / Seminar : FATIGUE BEHAVIOR OF SINTERED STEEL UNDER DIFFERENT TEMPERING TEMPERATURES | |
Conference / Seminar : FATIGUE CRACK NUCLEATION IN HIGH TOUGHNESS SINTERED STEEL | |
General Publication : FINITE ELEMENT METHOD (MOOC) 2022, -, Penulis Bersama - Co-Author, https://mooc.uthm.edu.my/course/search.php?search=finite | |
General Publication : MANUAL PENDAFTARAN PENGURUS TENAGA ELEKTRIK BERDAFTAR (PTE) MELALUI SISTEM ECOS BAGI GRADUAN SARJANA SAINS KEJURUTERAAN TENAGA LESTARI (MDL) 2022, -, Penulis Bersama - Co-Author, https://fkmp.uthm.edu.my/index.php/academic-programmes/postgraduate-programmes/master-of-science-in-sustainable-energy-engineering-coursework | |
General Publication : GARIS PANDUAN PENTAULIAHAN PENGURUS TENAGA ELEKTRIK BERDAFTAR (PTE) MELALUI PROGRAM SARJANA SAINS KEJURUTERAAN TENAGA LESTARI (MDL) 2022, -, Penulis Bersama - Co-Author, https://fkmp.uthm.edu.my/index.php/academic-programmes/postgraduate-programmes/master-of-science-in-sustainable-energy-engineering-coursework | |
General Publication : FEM ANALYSIS ON HYDRAULIC JACKS PERFORMED UNDER TEST METHOD BIDIRECTIONAL PILE LOAD TEST 2022, -, Penulis Bersama - Co-Author, - | |
General Publication : GARIS PANDUAN PELANTIKAN SEKOLAH ANGKAT 2021, -, Penyunting, - | |
General Publication : FKMP POSTGRADUTE PROGRAMMES HANDBOOK V 2.0 2021, -, Penulis Bersama - Co-Author, 03-0294 | |
General Publication : GARIS PANDUAN PENGANJURAN PROGRAM HUBUNGAN MASYARAKAT 2021, -, Penulis Bersama - Co-Author, - | |
General Publication : KERTAS KERJA MQA 02 CADANGAN AKREDITASI PENUH PROGRAM SARJANA SAINS KEJURUTERAAN TENAGA LESTARI (KERJA KURSUS) 2021, -, Penulis Bersama - Co-Author, https://fkmp.uthm.edu.my/index.php/academic-programmes/postgraduate-programmes/master-of-science-in-sustainable-energy-engineering-coursework | |
General Publication : BDA 31003 FINITE ELEMENT METHOD 2020, -, Penulis Bersama - Co-Author, http://penerbit.uthm.edu.my | |
General Publication : LAPORAN LAWATAN KERJA PENANDA ARAS ANTARA SARJANA SAINS KEJURUTERAAN TENAGA LESTARI, UNIVERSITI TUN HUSSEIN ONN MALAYSIA (UTHM) DAN SARJANA SAINS PENGURUSAN TENAGA, UNIVERSITI TEKNOLOGI MALAYSIA (UTM) 2019, -, Penulis Bersama - Co-Author, https://fkmp.uthm.edu.my/index.php/academic-programmes/postgraduate-programmes/master-of-science-in-sustainable-energy-engineering-coursework | |
General Publication : YJACK VALIDATION TEST PROGRAM - STRUCTURAL LABORATORY TESTS
2017, -, , - | |
General Publication : YJACK VALIDATION TEST PROGRAM - FINITE ELEMENT MODELING
2017, -, Penulis Bersama - Co-Author, - |